VSE Turbine Flow Meter-VTR Series
02/18/2015 Turbine flow meters are precise and reliable measuring equipment, designed for varied applications. VTR flow meters can be installed even under the harshest application conditions including oil, petrochemical and chemical industries as well as other industrial sectors.
Basically, the VTR series consists of a rotor, the housing and the measurement pick-up. The flow of fluid activates the rotor. When the rotor blades interrupt the magnetic field lines of the pick-up system, the motion of the rotor is detected. As a result of the specific inner diameter, the turbine's revolutions are directly proportional to the flow.
Performance data
Flow range 110 l/h up to 7.500 m3/h
Pressure range up to 250 bar
Temperature range – 40°C up to +120°C
Frequency range up to 1.300 Hz
Viscosity range 1 up to 5 cSt
Applications
Water-like substances
Water
Oils
Petrochemicals
About This Author
PT.WIRATAMA MITRA ABADI is company who are supported by experienced, trained, dedicated staff and also well established workshop to help ind ustrial world in order to improve efficiency and productivity through Design, Modification, Recondition, Improvement and Technical supply. We can supply of eng…
More Articles From This Author
02/19/2015 Baumer Hubner products have proven themselves worldwide in tough operating conditions, such as in the paper industry, wind power plants and outdoor crane installations. INCREMENTAL ENCODERHubner Encoder OG 6 Hubner Encoder OG 60 • HOG 60 Hubner Encoder OG 70 • HOG 70 Hubner Encoder OG 71 &... Read More »
02/19/2015 IBS Batch Control GMBH is one of the leading producers of intrinsically safe process control devices. We have a long term tradition and experience in process engineering for more than 25 years.Our products are used in the international petrochemical, chemical, paint, cosmetic and pharmaceutical indu... Read More »
02/19/2015 Hokuyo always keeps up with the newest changes of social standards and sense of values.We consistently maintain a unique, solid management to best assure customers’ satisfaction and our company’s development.Hokuyo Sensor Products :
Parallel type
DMS
DMH-GB/HB... Read More »
02/19/2015 Sistem pelumasan SHOWA LUBRICATION terdiri dari 2 sistem sub-pelumasan utama, dengan perbedaan metode yang didasarkan dari distribusi dan debit. Lihat di bawah ini untuk mengidentifikasi sistem pelumasan yang diperlukan untuk aplikasi pelumas tertentu. 1. Volumetric SystemsPada jenis Volumetric Syst... Read More »
02/19/2015 Fuel flow meter DFM is designed for diesel fuel consumptionmeasuring in the fuel line of the following vehicles:
trucks;
tractive vehicles;
tractors of various types;
loaders;
graders;
road-building machinery;
boilers;
boats;
burners;
technological transport;
fixed installations with di... Read More »
02/19/2015 Utilizing the business know-how, Sogyo has been readily working on the “Ecology and Energy” project to contribute to a worldwide concern, environment preservation. To use limited resources effectively and reduce negative effects on the environment, we are dedicated to spread oil recyclin... Read More »
02/19/2015 .The study of innovative solutions and the application of new technologies make it possible for continuous improvement of the complete range of products and, in many cases, an increase of their performance.The experimentation of the new technical solutions and the very stringent reliability tests wh... Read More »
02/19/2015 he study of innovative solutions and the application of new technologies make it possible for continuous improvement of the complete range of products and, in many cases, an increase of their performance.The experimentation of the new technical solutions and the very stringent reliability tests whic... Read More »
02/19/2015 Since its establishment, NGK has been engaged in manufacturing ceramic insulators and is now recognized as a leading manufacturer throughout the world. Over the past years, NGK developed O2 analyzers using technology based on ZIRCONIA. Most recently, NGK has produced various instruments independentl... Read More »
Werma Optical and Audible Signal Devices
02/19/2015 WERMA Signaltechnik is one of the world's leading companies in the design and manufacture of optical and audible signal devices commonly known as beacons and sounders. The global company, based in South West Germany, sets the pace with its many innovative design solutions. Our signal devices ensure... Read More »
02/19/2015 For more than 30 years, we’ve been offering the right products for small and mid-sized companies, as well as for international industrial conglomerates. In addition to Photoelectronic and Inductive Sensors, our core areas of expertise also include Ultrasonic Sensors, Fluid Sensors, Vision Syst... Read More »
Harting Electrical Rectangular Connector
02/19/2015 Harting adalah brand connector yang paling popular karena disamping banyak di gunakan di dunia manufacture connector harting juga banyak digunakan di dunia otomatisasi, komunikasi, broadcast, kesehatan, transportasi, oil and gas dan power. Begitu banyaknya type dan model dari connector harting memba... Read More »
Sibas Electrical Rectangular Connector
02/19/2015 Pada dasarnya unit lengkap dari Sibas Connector terdiri dari :1. Insert Terminal, terdiri dari 2 bagian yaitu Insert Male dan Insert Female dengan jumlah anak kontak (contact pin) bervariasi dengan jumlah 3, 4, 5, 6, 10, 16, 24, 48 hingga 120 tergantung dari kebutuhan serta ketahanan terhadaparus li... Read More »
Daiwa Dengyo Electrical Safety Plug
02/19/2015 Safety plug layaknya connector yang mempunyai fungsi sebagai pengaman atau pemutus arus power listrik sehingga mesin akan berhenti tidak bisa dioprasikan mana kala safety plug tidak diconnect.SPT-1 SERIESSPT-11, SPT-11-UL, SPT-11-CSASPT-11-HSPT-11-DLSPTL-11SPT-3CDSPT-11-S14SPT-2 SERIESSPT-22, SPT-22... Read More »
Nanaboshi Electrical Circular Connector
02/19/2015 Connector Nanaboshi diklasifikasikan dalam dua catagory yaitu type S dan type G. Nanaboshi Connector hanya mempunyai konstruksi berbentuk bulat yang sering disebut dengan istilah circular connector. Ada dua bagian utama pada connector nanaboshi yaitu plug and receptacle dan sering juga di lapangan d... Read More »
02/19/2015 Gast air motor adalah air motor atau pneumatic motor yang dikeluarkan atau di produksi oleh Gast Manufacturing, Inc yag berlokasi di Benton Harbor Amerika Serikat. Seperti yang telah di jelaskan sebelumnya dalam menentukan atau memilih air motor ataupeneumatic motor dari brand GAST ini juga perlu di... Read More »
Site Lab Ultrasonic Inline Flow Meter-SL3488 Series
02/19/2015 The model SL3488 inline ultrasonic flow meter (here in after referred to as SL3488) is a true state-of-the-art transit-time flow meter designed using PICOFLY technology and 0.01 nanosecond (10 pico seconds) resolution; the flow sample rate achieved is 256 discrete flow measurements per second, which... Read More »
Site Lab Ultrasonic Mount and Play Flow Meter-SL1438K Series
02/19/2015 The 1438K Has integral sensors and clips over PVC pipesFlow range: 0.01 ~ ± 5m/sAccuracy: ± 1.5% FSRepeatability: 0.3%Pipe size: DN20 ~ DN63Fluid: WaterPipe material: PVC... Read More »
Site Lab Ultrasonic Hand Held Flow Meter-SL1188P Series
02/19/2015 Model SL1188P is a Portable Ultrasonic flow Meter. It collects Flow Data via a TPC (Tablet PC), and uses “UFM” software to download the Flow Data. The SL1188P Portable Ultrasonic Flow Meter consists of flow sensors (ultrasonic), a flow transmitter and a Tablet Personal Computer (TPC). Th... Read More »
Site Lab Ultrasonic Wall Mount Flow Meter-SL1188 Series
02/19/2015 The SL1188 Ultrasonic clamp on flow meters is a state-of-the-art universal transit-time flowmeter designed using SLSI technology and low voltage broadband pulse transmission. While principally designed for clean liquid applications, the instrument is tolerant of liquids with small amounts of air bub... Read More »
Site Lab Ultrasonic Hand Held Flow Meter-SL1168P Series
02/19/2015 SiteLab Ultrasonic Flow Meters is devote to make the liquid resource effective use, provide energy saving and emission reduction, reduce liquid resource loss. To measure accurately and coming up with the overall plan to promote the liquid resource use effectivelySiteLab ultrasonic flow meters produc... Read More »
Site Lab Ultrasonic Wall Mount Flow Meter-SL1168 Series
02/19/2015 Ultrasonic Flow meter uses the latest digital technology and low-voltage broadband pulse transmission. The instrument is tolerant of liquids with small amounts of air bubbles or suspended solids found in most industrial environments. With distinctive features such as high accuracy, high reliability,... Read More »
Tek Air HVAC Vortex Air Flow Meter-VT8000 Series
02/19/2015 The VT-8000 Airflow Measuring Device consists of multiple sensors which are mounted on the fan to provide frequency pulse type electronic output signals which are directly proportional and linear to airflow velocity. These signals are totalized in the companion transmitter and converted to an indust... Read More »
Tek Air HVAC Vortex Air Flow Meter-VT7000 Series
02/19/2015 .The VT-7000 Airflow Measuring Device consists of multi-sensor probes mounted on a bar and installed in the inlet of large fan inlets. Individual sensors on the probe provide frequency pulse type electronic output signals which are directly proportional and linear to airflow velocity. These signals... Read More »
Tek Air HVAC Vortex Air Flow Meter-VT5000 Series
02/19/2015 Velocity measurement is accomplished by Tek-Air's unique, patented, VorTek sensors. VorTek sensors utilize proven vortex shedding phenomena to measure the true airflow velocity independent of changes in temperature, density, and humidity which affect Pitot and thermal airflow measurement systems. Th... Read More »
Tek Air HVAC Vortex Air Flow Meter-VT2000 Series
02/19/2015 The VT-2000 Airflow Measurement Probe consists of multi-sensor probes available as insertion probes or in pre-assembled airflow stations. Individual sensors provide frequency pulse outputs which are directly proportional and linear to airflow velocity. These digital signals are totalized in the comp... Read More »
Gerand Fire Pump Test Flow Meter
02/18/2015 Gerand Engineering Company was founded in 1965 by a qualified team of engineers with years of experience dedicated to providing outstanding quality products for hydronic balancing in the HVAC industry.Gerand’s product line consists of Venturis, Indicators (orifice type) and Balvalve-Venturis (... Read More »
VSE Gear Flow Meter-VHM Series
02/18/2015 The positive displacement gear flow sensors of the VHM Series are based on the meshing gear principle and were developed for high precision flow metering for a wide variety of liquids, especially liquids with high abrasiveness and poor lubricity. Each tooth generates an impulse by recognition of the... Read More »
VSE Aluminum Positive Displacement Flow Meter-EF Series
02/18/2015 Based on the same meshing gear principle as the VSE Series VS andVHM the VSE EF ecoflow sensor measures viscous media, however as in-line-device.The VSE EF ecoflow is an inexpensive alternative to the VS Series for measuring tasks with lower standards of technical characteristics such as accuracy, p... Read More »
VSE Helical Screw Flow Meter-RS Series
02/18/2015 RS flow meters measure the flow rate based on the screw pump principle. The newly developed rotor profiles ensure a low-resistance, high-precision measurement while gently transporting the measuring medium.VSE optimized material and technology in the bearing area. The combined radial / axial slide b... Read More »
VSE Positive Displacement Flow Meter-VS Series
02/18/2015 .VS positive displacement flow meters are volume rate measuring sensors based on the meshing gear principle and are designed for use with liquids. Two precisely matched gear wheels are enclosed in a very accurately machined housing. Gear rotation is sensed by a noncontacting signal pick-up System. E... Read More »
Seametrics Data Logger-DL76 Series
02/18/2015 The DL76 is a battery-powered data logger that can be used with any Seametrics fowmeter. It stores pulses for up to 3 years, depending on the user-selected frequency of reading. Indicator lights on the unit fash to indicate when it is functioning and when the battery is low.The DL76 can be factory-m... Read More »
Seametrics Dual Pulse Timer-PT35 Series
02/18/2015 The PT35 digital counter-timer is designed to be used with Seametrics (or similar) meters and fow sensors that produce a pulse signal. It is typically used in water treatment and chemical dosing applications, most often in cooling towers and boilers. The PT35 serves as either a single or a dual time... Read More »
Seametrics Pulse Splitter-PS40 Series
02/18/2015 The PS40 is a low-voltage device that allows a Seametrics fow sensor to drive multiple (up to four) pulse-responsive devices, such as solenoid-driven chemical metering pumps, counter timers, or remote totalizers. It requires an external DC power supply for operation and can provide power to a single... Read More »
Seametrics Pulses Divider-PD10 Series
02/18/2015 Designed for use as a meter accessory, the PD10 divider is used primarily for pacing electronic metering pumps. Any number from one to 9999 can be set on rotary switches. Each time the divider has received the set number of pulses from the meter, it puts out one pulse to stroke the pump. The PD10 is... Read More »
Seametrics Blind Analog Transmitter-AO55 Series
02/18/2015 The Seametrics AO55 is a blind (non-indicating) 4-20 mA transmitter, designed for use with almost all Seametrics fow sensors. It accepts a pulse frequency input from the fow sensor, and converts this input into a continuous analog output signal. Power for the transmitter is taken from the current lo... Read More »
Seametrics Batch Flow Controller-FT500 Series
02/18/2015 The FT500-Series is a batching fow processor with additional output controls. It is designed for use with Seametrics fow meters and fow sensors, as well as other manufactuer’s products which have frequency output proportional to fow. In addition to batch functions, the FT500-Series indicates f... Read More »
Seametrics Flow Controller-FT400 Series
02/18/2015 The FT400-Series fow computers are microcontroller-based indicator/transmitters that display fow rate and total and provide output signals. The FT415 is battery-powered and provides a scalable pulse output. The FT420 is powered by external DC voltage and has both pulse and 4-20 mA analog outputs. Wh... Read More »
Seametrics Acrylic Impeller Flow Meter-SPX Series
02/18/2015 These versatile impeller fowmeters are availalble in 3/8", 1/2”, 3/4”, and 1" nominal pipe sizes with female NPT threads. They employ jewel bearings to allow for very low minimum fow rates and superior life.With a body material of polypropylene, the SPX is an economical choice for meteri... Read More »
Seametrics PTFE Impeller Flow Meter-SPT Series
02/18/2015 These versatile impeller fowmeters are availalble in 3/8", 1/2”, 3/4”, and 1" nominal pipe sizes with female NPT threads. They employ jewel bearings to allow for very low minimum fow rates and superior life.With a body material of polypropylene, the SPX is an economical choice for meteri... Read More »
Seametrics Stainless Steel Impeller Flow Meter-SES Series
02/18/2015 The SES single-jet meter provides accurate, wide range fow metering in an extremely rugged stainless steel package. Single-jet simplicity combined with high quality jewel bearings results in long life and relatively high tolerance for problem fuids. Typical applications are chemical batching, propor... Read More »
Seametrics Paddlewheel Flow Meter-IP100 Series
02/18/2015 The IP100/200-Series are adjustable depth insertion paddlewheels that come in brass or 316 stainless models to ft 3” to 40” pipe. Installation fttings are standard 1-1/2" (101/201) or 2” (115/215) NPT. Fittings such as saddles and weldolets may be purchased either locally or from S... Read More »
Seametrics Paddlewheel Flow Meter-IP80 Series
02/18/2015 The IP80-Series are impeller (or “paddlewheel”) insertion meters designed for use with a wide variety of liquids in pipe sizes 1/2" to 8". Sensors are available in brass, 316 stainless steel, PVC, and polypropylene. Bodies are machined from a solid rod for maximum precision. High-quality... Read More »
Seametrics Insertion Turbine Flow Meter-TX100 Series
02/18/2015 The TX100/200-Series are adjustable depth insertion turbines that come in brass or 316 stainless models to ft 3” to 40” pipe. Adapters mate with standard 1-1/2” (110/210) or 2” (150/250) FNPT threaded fttings such as saddles and weldolets which may be purchased either locally... Read More »
Seametrics Insertion Turbine Flow Meter-TX800 Series
02/18/2015 The TX800-Series are insertion turbine meters designed for use in 1-1/2" to 8" pipe. High-quality jewel bearings and precision shafts ensure long life and low friction. Available in 316 stainless steel, brass and PVC, sensor bodies are machined from solid rod for maximum low-fow performance. The TX8... Read More »
Seametrics Stainless Steel Turbine Flow Meter-WTS Series
02/18/2015 This unique system of 2" to 8" turbine meters uses just one moving part, a precision helical rotor. Rotation of the rotor is electronically detected and processed. The high-quality jewel bearings and polished zirconia ceramic shafts minimize friction while providing long wear life in non-lubricating... Read More »
Seametrics Turbine Flow Meter-WTC Series
02/18/2015 This unique system of 2" to 8" turbine meters uses just one moving part, a precision helical rotor. Rotation of the rotor is electronically detected and processed. The high-quality jewel bearings and polished zirconia ceramic shafts minimize friction while providing long wear life in non-lubricating... Read More »
Seametrics PVC Turbine Flow Meter-WTP Series
02/18/2015 This unique system of 2" to 8" turbine meters uses just one moving part, a precision helical rotor. Rotation of the rotor is electronically detected and processed. The high-quality jewel bearings and polished zirconia ceramic shafts minimize friction while providing long wear life in non-lubricating... Read More »
Seametrics Chemical Low Flow Electromagnetic Flow Meter-PE Series
02/18/2015 The PE102 magmeter is designed for low-fow chemical injection or diffcult-to-meter applications with pulsating metering pumps in 3/4” to 1/4” pipe/tube. The housing is made of sturdy splashproof HDPE plastic.With no moving parts, the PE102 can handle fuids containing particulate matter w... Read More »
Seametrics Plastic Bodies Electromagnetic Flow Meter-WMP Series
02/18/2015 The WMP-Series is a full-bore, plastic-bodied electromagnetic fow meter designed for fow and usage monitoring applications in 1 and 2 inch pipe. The polypropylene fow tube offers corrosion resistance to a wide range of chemicals. Its light weight and easy to install or remove from the pipe for inspe... Read More »
Seametrics Insertion Electromagnetic Flow Meter-EX100
02/18/2015 The complete lack of moving parts of the EX100/200-Series insertion fow sensor is the source of its reliability. Brass and stainless steel models withstand a variety of temperature, pressure, and chemical conditions. The EX-Series has no rotor to stop turning in dirty water and there are no bearings... Read More »
Seametrics Insertion Electromagnetic Flow Meter-EX80
02/18/2015 EX80-Series insertion electromagnetic flowmeters are designed for use with conductive liquids in 1 to 12” pipe. A choice of materials (stainless steel, brass, and PVC) allows the meter to adapt to a range of temperature, pressure, and corrosive environments.The EX80 is highly suitable for diff... Read More »
Seametrics Electromagnetic Flow Meter-WMX Series
02/18/2015 The WMX-Series are fanged electromagnetic fowmeters for use in 4” to 10” pipe in municipal or industrial water and wastewater applications where propeller meters have typically been used in the past. Because the WMX has no moving parts and has electrodes designed to discourage fouling, t... Read More »
Seametrics Electromagnetic Flow Meter-iMag Series
02/18/2015 The iMAG-Series is the most economical flanged electromagnetic flowmeter on the market. It is used in 3” to 12”pipe in municipal or industrial water, wastewater, pump stations and packaged plant applications. The iMAG has no moving parts and electrodes are designed to discourage fouling.... Read More »