2-in-one gemmological stereozoom microscope THE MODELS The OPTIGEM Microscope is a revolutionary 2-in-1 gemmology instrument that can be used both as a vertical and as horizontal microscope, at the turn of a knob and without disassembling any part. A special ultrabright LED-based electronic condenser, with intensity control, and yet always perfectly colour-matched to sunlight, allows to switch from bright to dark field at the flip of a switch. The condenser uses a novel optical configuration for an impressive dark field usability range, that will make you totally forget those uncomfortable hours spent “looking for light”. An additional flexible arm and velvet-field slider allow for extra contrast, for crisp and vibrant images even in a brigtly lit environment. A modular optional accessory range, that includes gemmology clips, an iris aperture diaphragm, a polarization analysis kit, an optical unit to switch the dark field from a “sharp” (gem exhibition) to a “soft” (diamond analysis) mode and a translating cell holder with vacuum pick-up and quartz immesion cells complete and enhance the instrument usability. All the accessories can be stacked, in any order, both when the microscope is being used as a horizontal unit and when it is in its vertical configuration. The microscope body can be rotated through a full 360°, yet keeping the base sturdly fixed on the table, to show gems to a potential customer, or to share opinions with a colleague. SPECIFICATIONS Zoom head magnification: 0.7x – 4.5x (binocular and trinocular). Observation angle: the microscope can be inclined through full 90° from vertical to horizontal. Illumination: intensity controlled bright field, dark field and flexible arm, all sunlight-matched. Eyepieces: WF10x, high-point type. Microscope rotation: 360° rotating (vertical configuration only) Gemmology clips. Stage: with 3 attachment points for gemmology clips. MODELS OPTIGEM-1: with binocular head OPTIGEM-2: with trinocular head