Balances and platforms to be used in hazardous environments - Gibertini
By PT LABODIA PRIMA
· 03/01/2010
CESI certificate is valid all over EU; the instruments are suitable to be used in presence of dangerous, inflammable or explosive gases or vapours belonging to group II B (i.e.: paints, solvents, propane, ethylene). The balances are made of two parts: The weighing unit, that includes the weighing cell and the functional commands, intrinsic security construction The control unit, that includes the whole electronic part according to security rules EEX q II B T5 (quartz dust). PLATFORMS Capacity kg Readability g Linearity g TMB 25 EX 25 0,5 ± 1 TMB 35 AR EX 6,5/35 0,1 / 1 ± 0,2 / 2 TMB 50 EX 50 1 ± 2 TMB 150 EX 150 5 ± 2 TMB 300 EX 300 10 ± 20 TMB 600 EX 600 20 ± 40 TMB1500 EX 1500 50 ± 100 TMB 1500 A EX 1500 50 ± 100 TMB 3000 EX 3000 100 ± 200 PLATFORMS Homologated CE 384 Capacity kg Readability g Linearity g PTF 26 EX CE 26 0,5 ± 1 PTF 52 EX CE 52 1 ³ ± 2 BALANCES Capacity kg Readability g Linearity g EU 500 EX 510 0,001 ± 0,002 EU 1700 EX 1700 0,01 ± 0,02 EU 6000 EX 6300 0,1 ± 0,2 EUROPAINTEX 8.5 8500 0,1 ± 0,2 1 = Stainless steel 2 = Galvanized 3 = 0,1 g crossed 4 = Stainless steel pan with base 400x500 mm Others info are inside the Technical Card Full automatic calibration by external mass Tare range (by subtraction): up to the max. capacity Exclusive Gibertini antishock system for overload protection Seven segment display, small decimal digits ON/OFF display Bar-graph indicator for remaining capacity of the balance Membrane keyboard - solvent proof and easy to use Weighing underneath the balance (only for balances) Serial output by optical fibre External power supply: 220V (-15% / +10%) 18 VA. On request 110V-60Hz Working temperature: +10°C/+40°C (optimum +15°C/+30°C) Working relative humidity: 10 ÷ 85% Atex power supply dimensions: 200x100x85 mm. Protection class IP65 ON REQUEST: RS232 interface and data transmission fibre optic cable (length on request) frame for install platforms on the floor reading subdivision (it allows the reading with one more decade by serial transmission) accessory for the calibration with internal mass for models TMB 600-1500-3000.
About This Author
PT LABODIA PRIMA
jakarta, Dki Jakarta, Indonesia
PT. LABODIA PRIMA, perusahaan yang bergerak dalam bidang pengadaan alat-alat laboratorium, alat gelas dan bahan kimia untuk industri, pendidikan dan penelitian. Dengan latar belakang pengalaman kami selama ± 13 tahun yang didukung oleh Sales & Technician Team yang professional, serta Jaminan / Garan…
More Articles From This Author
Aluminium bottle UN - BUERKLE
2011-05-11Aluminium transport bottles with screw cap close safely and tightly and are approved for packaging type I (X). The UN code is printed onto the bottles in black.Pure aluminium (material AL 99.5)FKM sealUN approvedWith eyelets, sterilisableCa… Read More »
OTAL hand pump made of PP - BUERKLE
2011-05-11The telescopic immersion tube adapts itself to the container height on insertion. This ensures good removal of residual liquid and means that the pump can be used with different containers.OTAL hand pumps with PP delivery tubes, resistant t… Read More »
OTAL foot pump made of PP - BUERKLE
2011-05-11The telescopic immersion tube adapts itself to the container height on insertion. This ensures good removal of residual liquid and means that the pump can be used with different containers.OTAL foot pumps with delivery tubes made of PP, res… Read More »
Liquid-Sampler, open with thumb - BUERKLE
2011-05-11Liquid-Sampler, open with thumb - BUERKLESampler for thin to viscous liquids. Easy use with one-handed operation. With discharge funnel for safe filling of the sample bottles. Material V4A (1.4404).The valve is opened with the thumb to empt… Read More »
MicroSampler - BUERKLE
2011-05-11The MicroSampler has especially been designed for the sampling of small quantities of powder.Volumes of 0.2 ml, 0.5 ml, 1.0 ml, 2.0 ml, 5.0 ml and 10 ml can be sampled easily, quickly and cleanly from different sampling depths from sacks or… Read More »