Add your business to ZipLeaf for free!
 Indonesia Business Directory
HPI Baja 5B SS Kit with Clear Body HPI10610

By CV Shopmybaby

HPI Baja 5B SS Kit with Clear Body HPI10610

07/07/2013 Features:

Chassis: Narrow channel monocoque design 0.16" (4mm) thick, gun-metal gray in color, constructed of aircraft grade 6061 T6 aluminum, side guards protect engine from dirt and debris
Drive: Rear wheel gear drive with heavy duty dogbones
Engine: 2 cycle 1.6 cu in (26cc) gasoline with pull starter, quick release foam air filter, primer, choke and kill switch
Servo: Water proof, metal gear high torque 25kg-cm steering servo speed, 0.16 sec at 60 degrees
Ball Bearings: Full set included
Shocks: Four VVC heavy duty aluminum shocks with 5 externally adjustable dampening settings and dual rate springs for progressive dampening action on all surfaces, modified rear shock tower brace
Main Gear: 57 tooth composite construction
Gearbox: Sealed, heavy duty metal gears
Differential: Viscous Torque Control can be tuned using different weight diff oils, hardened metal planetary gears, aluminum alloy diff case
Brakes: Ventilated dual disc
Clutch: 2-shoe, 8000 RPM
Gas Tank: 25.3 oz (750cc)
Front Tires: HPI Dirt Buster Rib Pattern M compound 2.4" (60mm) wide 6.7" (170mm) outer diameter
Rear Tires: HPI Dirt Buster Block Pattern S compound 3.1" (80mm) wide, 6.7" (170mm) outer diameter
Wheels: Black 5-spoke, nylon 3-piece bead lock, bead is bolted to wheel to hold tire securely in place-no need for tire glue
Body: Clear pre-cut
Rear Wing: Molded black plastic with decals applied
Roll Cage: Baja style high impact nylon protects engine and body from crash damage
Suspension: Fully adjustable, long travel double wishbone
Caster: Adjustable, with shims 22 / 25.5* stock / 29 degrees caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis
Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle
Warranty: 2-year limited, valid only in USA, Canada and South America Baja light sets are available

At the heart of the Baja SS is the #15403 Fuelie 26S 26cc engine, a tougher, stronger and more powerful engine than the standard 23cc Fuelie engine in the Baja 5B RTR buggy. With more displacement you get increased low-end grunt, more acceleration and huge top-end speed! The Fuelie 26S is a 2-stroke engine powered by regular pump petrol that is mixed with 2-stroke engine oil, so the running cost of the engine is extremely low when compared to any normal nitro powered glow engine. You'll spend just pennies per tank on fuel!

To handle the extra horsepower of the Fuelie 26S, the drivetrain of the Baja SS is boosted with specially designed option parts that can handle the power increase. Providing a boost of extra power is the Aluminum Tuned Pipe, which is designed just for the 26cc engine and gives even more acceleration power to the Baja SS. The 8000 RPM Clutch lets the engine rev up to a high RPM before engaging the drivetrain, giving you lightning-fast acceleration off the starting line and out of every corner. Protecting the differential is the #87568 Aluminum Alloy Diff Case, giving protection from the extreme strength of the engine. Finally, the Heavy Duty Rear Dogbones get the power from the diff to the rear wheels with chunky steel driveshafts and jointed rubber boots for minimal loss of power.

To improve the handling of the Baja even further, a full set of new #87561 and #87562 VVC/HD Baja shocks are included that improve handling on all types of terrain and are also heavy-duty to keep things secure on the track. A complete set of #86618 sway bars are included to keep your Baja SS planted in the curves and aid traction. To get more rear suspension travel at the rear, our designers have modified the rear shock tower brace - this gives you better rear traction and increased braking for lower lap times!

The Baja SS carries over the robust, efficient and highly detailed double-wishbone suspension from the standard Baja 5B, giving you amazing control and precision over any type of terrain. The suspension doesn't just look like the real deal, it's built to last! The rugged upper and lower arms will soak up the bumps and rough landings of fast off-road driving and racing, plus it's super-strong to hold up in those inevitable crashes and rollovers!
The front and rear suspension hubs are also extremely durable and made from tough nylon composite material, so it will go the distance and absorb any bumps from crashes. Thick steel turnbuckles connected with strong composites provide a full range of movement while providing protection, plus they allow you a good range of adjustments so you can fine-tune your settings to get past the pack on the racetrack!

In addition to all the heavy duty options included with the kit, you get a tough, super-strong steering servo that is already equipped with the #80584 Metal Gear Steering upgrade. This allows you to have the security of reliable, quick steering in all conditions. With a powerful servo controlling the steering, the Baja SS will track straight and true when you want it to, no matter how bumpy the running surface it. The front wheels will also stay pointed in the right direction as you power through the turns! This is a great standard feature of the Baja SS, putting you well on your way to a solid electronics package.

To protect the tire sidewalls the kit also includes #3272 Heavy Duty Bead Locks in the Baja silver. The Heavy Duty Bead Locks feature a wide rim that extend further over the sidewall of the rear tires to protect the tires in all conditions, and especially as the Baja slides through corners and across rough ground. They are a great way to extend the life of the tires, and are available in a variety of colors to enable you to match any custom color scheme!

Finally, we can't let the awesome good looks of the Baja SS go unannounced. Not only do you get the option #87477 Gunmetal Anodized Main Chassis, you get a full range of bright orange anodized aluminum 6061 T6 that are specific to the Baja SS. To top everything off, you get a clear bodyshell set that is totally ready for your custom paint scheme! Go for a cool subdued 'urban camo' paint job, a nice flame color scheme or throw your own custom racing paint scheme on the Baja SS to show off just a bit!

Requires:
Radio: 2-3 ch FM or 2.4GHz with standard size servo for throttle (do not use AM radio)
Receiver Battery: 6V hump configuration, at least 3000mAh
Battery Charger: Timed or paek for receiver pack
Unleaded Gasoline: 87-93 octane, mix gasoline and two cycle oil at 25:1 ratio
Transmitter Batteries: 8 AA
Paint: Spray or brush-on for polycarbonate bodies
Building and track equipment


For more information regarding the product, you can visit our official website. You can also looking for the other simillar product and you can place your order directly from our official website, shopmybaby.com

About This Author

CV Shopmybaby

CV Shopmybaby

CV Shopmybaby is an Authorized Dealer / Reseller for various products distributor Remote Control Toys (RC Boats,RC Helicopters,RC Airplanes,RC Motorcycles,RC Semi Trucks,RC Cars & Trucks,RC Crawlers,RC UFO - Quadcopters and RC Tanks)CV Shopmybaby was founded in 2006.we will provide the best pric…

Read More »

More Articles From This Author

Tamiya Tiger 1 1/16 w/DMD T-03 & MF1 TAM56010

Tamiya Tiger 1 1/16 w/DMD T-03 & MF1 TAM56010

07/07/2013 This is the 1/16 scale Tamiya Tiger 1 Tank with a DMD Control Unit. This is Tamiya’s replica of the German tank that was feared by the Allied and deployed to nearly all of the independent tank battalions in the German armies in the latter part of WWII.Features: Flash of main gun muzzle is lin... Read More »

Gmade R1 ARTR Rock Crawler Buggy (Red Version) GMA51001

 Gmade R1 ARTR Rock Crawler Buggy (Red Version) GMA51001

07/07/2013 Features: All-in-one body and tube frame Adjustable, aluminum oil-filled shocks Dual sided bead-lock wheels Four link suspension 4WD shaft drive transmission Excellent Tire Traction Tube frame design, based on a full scale crawler -- light and durable Adjustable shock mounting for fine-tunin... Read More »

Tamiya 1/14 Globe Liner Semi Kit TAM56304

Tamiya 1/14 Globe Liner Semi Kit TAM56304

07/07/2013 FEATURES: 3-speed transmission with constant mesh gearsMetal rail chassisScale suspension with heavy duty metal leaf-springs and coil spring dampersPropeller-shaft driven rear axlesNumerous scale body accessories including metal grab rails and side mirror supports, metal dual exhaust pipes and chrom... Read More »

DuraTrax 1/5 DX450 Brushless On/Off Rd Motorcycle RTR DTXD02

 DuraTrax 1/5 DX450 Brushless On/Off Rd Motorcycle RTR DTXD02

07/07/2013 This is the 1/5 scale DuraTrax DXR500 Brushless On-Road Motorcycle RTR with a Tactic TTX-240 2-channel 2.4GHz radio, 75A ESC, and 3800kV Brushless Motor.Features: Rear wheel chain drive Tactic TTX-240 2-channel 2.4GHz Advanced FHSS radio for interference free performance with built-in fail safe D... Read More »

Kyosho EP Oxalys w/ Hacker A50-12S/X-70 KYO10852BHAC

Kyosho EP Oxalys w/ Hacker A50-12S/X-70 KYO10852BHAC

07/07/2013 This is the Kyosho Oxalys Stunt Plane with the Hacker A50 Motor and X-70 Programmable Speed Control. Pre-assembled airplane meets demands for both GP and EP versions.Features: Aluminum motor mount hard anodized in blue for style and performance Battery changes possible without removing main wing.... Read More »

Thunder Tiger Mini Titan E325V2 Kit TTR4712-K10

Thunder Tiger Mini Titan E325V2 Kit TTR4712-K10

07/07/2013 Thunder Tiger Mini Titan E325V2 Kit. Performance has gone ballistic with the latest Mini Titan E325 V2 from Thunder Tiger. Tons of impressive features have been added, creating the ultimate 3D machine in its category: lightweight Carbon / Aluminum main frame, full metal rotor head, lightweight 3D pa... Read More »

Thunder Tiger Mini Titan E325SE Kit w/Motor/ESC/CF Blades TTR4711-K12

Thunder Tiger Mini Titan E325SE Kit w/Motor/ESC/CF Blades TTR4711-K12

07/07/2013 The Thunder Tiger Mini Titan E325SE Kit with Motor, ESC, and Carbon Fiber Blades. The Mini Titan E325SE Kit was designed by a team of expert engineers and tested by the world's best pilots. The mini Titan E325 delivers the ultimate 3D experience for a helicopter of this size.Features: Control Syste... Read More »

Heli-Max AXE 400 3D RxR wFutaba 3114 Servos HM 4000 HMXE0801

Heli-Max AXE 400 3D RxR wFutaba 3114 Servos HM 4000 HMXE0801

07/07/2013 Features: Airframe: Rigid molded two piece design Servos: Four Futaba S3114 micro servos Gyro: Heli-Max Pro heading lock with dual remote and mechanical gain adjustments, tail boom mounted allows drive belt adjustments without changing tail linkage Electronic Speed Control: 25A brushless with 2A... Read More »

AquaCraft Rio 51Z Off Shore Gas Vee 2.4GHz w/Zenoah 26cc AQUB41

AquaCraft Rio 51Z Off Shore Gas Vee 2.4GHz w/Zenoah 26cc AQUB41

07/07/2013 The first thing you'll notice about the Rio 51Z is its size. The second thing you'll notice is its power! A 26 cc Zenoah® G260PUM R/C's #1 marine gas engine delivers the super-fast speeds you demand. A Tactic™ 2.4GHz radio system provides you with interference-free, crystal-free control. A... Read More »