Safety plug layaknya connector yang mempunyai fungsi sebagai pengaman atau pemutus arus power listrik sehingga mesin akan berhenti tidak bisa dioprasikan mana kala safety plug tidak diconnect.SPT-1 SERIESSPT-11, SPT-11-UL, SPT-11-CSASPT-11-HSPT-11-DLSPTL-11SPT-3CDSPT-11-S14SPT-2 SERIESSPT-22, SPT-22...

Connector Nanaboshi diklasifikasikan dalam dua catagory yaitu type S dan type G. Nanaboshi Connector hanya mempunyai konstruksi berbentuk bulat yang sering disebut dengan istilah circular connector. Ada dua bagian utama pada connector nanaboshi yaitu plug and receptacle dan sering juga di lapangan...

Gast air motor adalah air motor atau pneumatic motor yang dikeluarkan atau di produksi oleh Gast Manufacturing, Inc yag berlokasi di Benton Harbor Amerika Serikat. Seperti yang telah di jelaskan sebelumnya dalam menentukan atau memilih air motor ataupeneumatic motor dari brand GAST ini juga perlu di...

The model SL3488 inline ultrasonic flow meter (here in after referred to as SL3488) is a true state-of-the-art transit-time flow meter designed using PICOFLY technology and 0.01 nanosecond (10 pico seconds) resolution; the flow sample rate achieved is 256 discrete flow measurements per second, which...

The 1438K Has integral sensors and clips over PVC pipesFlow range: 0.01 ~ ± 5m/sAccuracy: ± 1.5% FSRepeatability: 0.3%Pipe size: DN20 ~ DN63Fluid: WaterPipe material: PVC...

Model SL1188P is a Portable Ultrasonic flow Meter. It collects Flow Data via a TPC (Tablet PC), and uses “UFM” software to download the Flow Data. The SL1188P Portable Ultrasonic Flow Meter consists of flow sensors (ultrasonic), a flow transmitter and a Tablet Personal Computer (TPC). Th...

The SL1188 Ultrasonic clamp on flow meters is a state-of-the-art universal transit-time flowmeter designed using SLSI technology and low voltage broadband pulse transmission. While principally designed for clean liquid applications, the instrument is tolerant of liquids with small amounts of air bub...

SiteLab Ultrasonic Flow Meters is devote to make the liquid resource effective use, provide energy saving and emission reduction, reduce liquid resource loss. To measure accurately and coming up with the overall plan to promote the liquid resource use effectivelySiteLab ultrasonic flow meters produc...

Ultrasonic Flow meter uses the latest digital technology and low-voltage broadband pulse transmission. The instrument is tolerant of liquids with small amounts of air bubbles or suspended solids found in most industrial environments. With distinctive features such as high accuracy, high reliability,...

The VT-8000 Airflow Measuring Device consists of multiple sensors which are mounted on the fan to provide frequency pulse type electronic output signals which are directly proportional and linear to airflow velocity. These signals are totalized in the companion transmitter and converted to an indust...

.The VT-7000 Airflow Measuring Device consists of multi-sensor probes mounted on a bar and installed in the inlet of large fan inlets. Individual sensors on the probe provide frequency pulse type electronic output signals which are directly proportional and linear to airflow velocity. These signals...

Velocity measurement is accomplished by Tek-Air's unique, patented, VorTek sensors. VorTek sensors utilize proven vortex shedding phenomena to measure the true airflow velocity independent of changes in temperature, density, and humidity which affect Pitot and thermal airflow measurement systems. Th...

The VT-2000 Airflow Measurement Probe consists of multi-sensor probes available as insertion probes or in pre-assembled airflow stations. Individual sensors provide frequency pulse outputs which are directly proportional and linear to airflow velocity. These digital signals are totalized in the comp...

Gerand Engineering Company was founded in 1965 by a qualified team of engineers with years of experience dedicated to providing outstanding quality products for hydronic balancing in the HVAC industry.Gerand’s product line consists of Venturis, Indicators (orifice type) and Balvalve-Venturis (...

Turbine flow meters are precise and reliable measuring equipment, designed for varied applications. VTR flow meters can be installed even under the harshest application conditions including oil, petrochemical and chemical industries as well as other industrial sectors.Basically, the VTR series consi...

The positive displacement gear flow sensors of the VHM Series are based on the meshing gear principle and were developed for high precision flow metering for a wide variety of liquids, especially liquids with high abrasiveness and poor lubricity. Each tooth generates an impulse by recognition of the...

Based on the same meshing gear principle as the VSE Series VS andVHM the VSE EF ecoflow sensor measures viscous media, however as in-line-device.The VSE EF ecoflow is an inexpensive alternative to the VS Series for measuring tasks with lower standards of technical characteristics such as accuracy, p...

RS flow meters measure the flow rate based on the screw pump principle. The newly developed rotor profiles ensure a low-resistance, high-precision measurement while gently transporting the measuring medium.VSE optimized material and technology in the bearing area. The combined radial / axial slide b...

.VS positive displacement flow meters are volume rate measuring sensors based on the meshing gear principle and are designed for use with liquids. Two precisely matched gear wheels are enclosed in a very accurately machined housing. Gear rotation is sensed by a noncontacting signal pick-up System. E...

The DL76 is a battery-powered data logger that can be used with any Seametrics fowmeter. It stores pulses for up to 3 years, depending on the user-selected frequency of reading. Indicator lights on the unit fash to indicate when it is functioning and when the battery is low.The DL76 can be factory-m...

The PT35 digital counter-timer is designed to be used with Seametrics (or similar) meters and fow sensors that produce a pulse signal. It is typically used in water treatment and chemical dosing applications, most often in cooling towers and boilers. The PT35 serves as either a single or a dual time...

The PS40 is a low-voltage device that allows a Seametrics fow sensor to drive multiple (up to four) pulse-responsive devices, such as solenoid-driven chemical metering pumps, counter timers, or remote totalizers. It requires an external DC power supply for operation and can provide power to a single...

Designed for use as a meter accessory, the PD10 divider is used primarily for pacing electronic metering pumps. Any number from one to 9999 can be set on rotary switches. Each time the divider has received the set number of pulses from the meter, it puts out one pulse to stroke the pump. The PD10 is...

The Seametrics AO55 is a blind (non-indicating) 4-20 mA transmitter, designed for use with almost all Seametrics fow sensors. It accepts a pulse frequency input from the fow sensor, and converts this input into a continuous analog output signal. Power for the transmitter is taken from the current lo...

The FT500-Series is a batching fow processor with additional output controls. It is designed for use with Seametrics fow meters and fow sensors, as well as other manufactuer’s products which have frequency output proportional to fow. In addition to batch functions, the FT500-Series indicates f...

The FT400-Series fow computers are microcontroller-based indicator/transmitters that display fow rate and total and provide output signals. The FT415 is battery-powered and provides a scalable pulse output. The FT420 is powered by external DC voltage and has both pulse and 4-20 mA analog outputs. Wh...

These versatile impeller fowmeters are availalble in 3/8, 1/2”, 3/4”, and 1 nominal pipe sizes with female NPT threads. They employ jewel bearings to allow for very low minimum fow rates and superior life.With a body material of polypropylene, the SPX is an economical choice for metering...

These versatile impeller fowmeters are availalble in 3/8, 1/2”, 3/4”, and 1 nominal pipe sizes with female NPT threads. They employ jewel bearings to allow for very low minimum fow rates and superior life.With a body material of polypropylene, the SPX is an economical choice for metering...

The SES single-jet meter provides accurate, wide range fow metering in an extremely rugged stainless steel package. Single-jet simplicity combined with high quality jewel bearings results in long life and relatively high tolerance for problem fuids. Typical applications are chemical batching, propor...

The IP100/200-Series are adjustable depth insertion paddlewheels that come in brass or 316 stainless models to ft 3” to 40” pipe. Installation fttings are standard 1-1/2 (101/201) or 2” (115/215) NPT. Fittings such as saddles and weldolets may be purchased either locally or from Se...

The IP80-Series are impeller (or “paddlewheel”) insertion meters designed for use with a wide variety of liquids in pipe sizes 1/2 to 8. Sensors are available in brass, 316 stainless steel, PVC, and polypropylene. Bodies are machined from a solid rod for maximum precision. High-quality j...

The TX100/200-Series are adjustable depth insertion turbines that come in brass or 316 stainless models to ft 3” to 40” pipe. Adapters mate with standard 1-1/2” (110/210) or 2” (150/250) FNPT threaded fttings such as saddles and weldolets which may be purchased either locally...

The TX800-Series are insertion turbine meters designed for use in 1-1/2 to 8 pipe. High-quality jewel bearings and precision shafts ensure long life and low friction. Available in 316 stainless steel, brass and PVC, sensor bodies are machined from solid rod for maximum low-fow performance. The TX800...

This unique system of 2 to 8 turbine meters uses just one moving part, a precision helical rotor. Rotation of the rotor is electronically detected and processed. The high-quality jewel bearings and polished zirconia ceramic shafts minimize friction while providing long wear life in non-lubricating f...

This unique system of 2 to 8 turbine meters uses just one moving part, a precision helical rotor. Rotation of the rotor is electronically detected and processed. The high-quality jewel bearings and polished zirconia ceramic shafts minimize friction while providing long wear life in non-lubricating f...

This unique system of 2 to 8 turbine meters uses just one moving part, a precision helical rotor. Rotation of the rotor is electronically detected and processed. The high-quality jewel bearings and polished zirconia ceramic shafts minimize friction while providing long wear life in non-lubricating f...

The PE102 magmeter is designed for low-fow chemical injection or diffcult-to-meter applications with pulsating metering pumps in 3/4” to 1/4” pipe/tube. The housing is made of sturdy splashproof HDPE plastic.With no moving parts, the PE102 can handle fuids containing particulate matter w...

The WMP-Series is a full-bore, plastic-bodied electromagnetic fow meter designed for fow and usage monitoring applications in 1 and 2 inch pipe. The polypropylene fow tube offers corrosion resistance to a wide range of chemicals. Its light weight and easy to install or remove from the pipe for inspe...

The complete lack of moving parts of the EX100/200-Series insertion fow sensor is the source of its reliability. Brass and stainless steel models withstand a variety of temperature, pressure, and chemical conditions. The EX-Series has no rotor to stop turning in dirty water and there are no bearings...

EX80-Series insertion electromagnetic flowmeters are designed for use with conductive liquids in 1 to 12” pipe. A choice of materials (stainless steel, brass, and PVC) allows the meter to adapt to a range of temperature, pressure, and corrosive environments.The EX80 is highly suitable for diff...